distribution units 4752 www.schurter.com/pg07_ connectors strip block for snap-in mounting with 4 iec appliance outlets f f 70 c description - panel mount: snap-in version from front side - 2 functions: module of 4 outlets, pin temperature 70 c, protection class i - solder terminals or quick connect terminals approvals - csa license number: 56242 characteristics - busbar is of single piece (no soldering) - insulation cover on the rear-side - qualified for use in equipment according iec/en 60950 other versions on request - for protection class ii references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 15 a / 250 vac; 60 hz dielectric strength > 2 kvac between l-n > 2 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 30 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal solder terminals or quick connect ter - minals panel thickness s snap-in1/1.2/1.5/2/2.5/3 mm tolerance +0.0/-0.1 material: housing thermoplastic, black, ul 94v-0 appliance outlet f acc. to iec/en 60320-2-2, ul 498 csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1
2 distribution units 4752 www.schurter.com/pg07_ connectors dimensions quadbloc 4752 panel cut-out 96,2 x 32,5 mm, corner radius max. 1 mm variants panel thickness s [mm] terminal length [mm] order number 1 quick connect terminals 6.3 x 0.8 mm 100 4752.3200 1.2 quick connect terminals 6.3 x 0.8 mm 100 4752.8200 1.5 quick connect terminals 6.3 x 0.8 mm 100 4752.4200 2 quick connect terminals 6.3 x 0.8 mm 100 4752.5200 2.5 quick connect terminals 6.3 x 0.8 mm 100 4752.6200 3 quick connect terminals 6.3 x 0.8 mm 100 4752.7200 1 solder terminals 4 x 0.8 mm 100 4752.3400 1.2 solder terminals 4 x 0.8 mm 100 4752.8400 1.5 solder terminals 4 x 0.8 mm 100 4752.4400 2 solder terminals 4 x 0.8 mm 100 4752.5400 2.5 solder terminals 4 x 0.8 mm 100 4752.6400 3 solder terminals 4 x 0.8 mm 100 4752.7400 1 solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.3000 1.2 solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.8000 1.5 solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.4000 2 solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.5000 2.5 solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.6000 3 solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm 100 4752.7000 please note, all quadblocs are available in protection-class ii upon request. cord retaining clamp see accessories packaging unit 50 pcs
distribution units 4752 www.schurter.com/pg07_ connectors accessorie s description cord retaining kit s cord retaining strain relief flat head, e 4700.0005 flat head, g 4700.0007 mating inlets/plug s category / description interconnection cord overview complet e interconnection cord with iec plug e, angled 060 7 interconnection cord with iec plug e, angled 060 8 interconnection cord with iec plug e, straight 060 9 interconnection cord with iec plug g, angled 607 b interconnection cord with iec plug g, angled 608 b interconnection cord further types to 475 2 ... plug overview complet e iec plug e, cord connector (rewireable), straight, max. cable diameter 8.5 mm 473 2 iec plug e, cord connector (rewireable), angled, max. cable diameter 10 mm 473 3 iec plug e, cord connector (rewireable), straight, max. cable diameter 10 mm 473 5 iec plug e, cord connector (rewireable), angled, max. cable diameter 10 mm 473 6 iec plug e, cord connector (rewireable), straight 900 9 plug further types to 475 2 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|